Questions & Answers for: signal computer monitor mac mini

...computer but this has not fixed the issue. Try adjusting the monitor brightness (F2). If you have an extra monitor, try connecting the mini VGA to see if it outputs a signal extenally. The videocard ...

signal coming from the mini-DVI port on the Apple computer. This means that instead of buying a single mini-DVI cable from Apple and using a cheap DVI-to-VGA adaptor when you need VGA output, you must

monitor for my Mother's Mac mini. I can not get a signal using the DVI connection. There is a hint of the spinning apple then the screen goes dark after startup. I have attached the DVI cable directly

...computer. When I switch from the Envision to the SVA, I get the message '' out of range''. How can I get the SVA monitor to respond? This usually means the display resolution settings on your PC are ...

signal'' tried detecting displays in system preferences, but same problem occurs. I had a similar problem with a Mac Mini. The problem was caused by a mix-matched resolution (the Mac tries to use 75Hz

...signal and turns black ViewSonic display works on other computers. I have one mac mini sharing a broadband modem network with three other computers.Keyboard and mouse are wireless. his step-by-step ...

...Mac Mini is not a match for male plug on Dynex DX-AP110. Any suggestions ? Thanks The IOGEAR GCS632U is designed to work with VGA computers and monitors. Using the Mini DVI to VGA adapter is not ...

...monitor is black with a error message :input signal out of range We are connected to a Mac Mini This problem seemed to happen after the monitor was accidently disconnected and then when it was ...

...signal. I ran a HDMI to DVI adapter on the Mac Mini, then have a DVI cable connecting to the TV. NO luck. I connected the TV before with a MacBook using a display port to VGA + VGA cable and a VGA to ...

...signal" error, and I have to restart the computer. Sometimes when I restart the computer I see nothing on the screen instead of an error. But after I restart it a few times, it eventually works, and ...