Questions & Answers for: Chevrolet Silverado no signal

left turn signal turns on emergency blinkers hi, when i turn the left turn signal on, the emergency lights come. that is all 4 lights start blinking. i think the problem is in the sterring columb area

my turning signals dont work where is my fuse box The fuse box containing the turn signal fuses is under the hood forward of the brake master cylinder on the drivers side. The bottom of the fuse cover

Signal lights inside and outside so not work. Signal lights inside and outside do not work. Bounght Signal light flasher. Unable to find it to replace. Where is it? in the steering coloum right side i

turn signals not working, and 4-ways do. its not the flasher or the fuse. turn signal fuse keeps blowing. turn signal switch isn't broke and no shorts in the wires. why am i blowing fuses? try putting

Signals and brake lights dim when brakes applied When the brakes are applied the rear brake lights and signals are dim and the front signals are on dim also. The turn signals work until the brake is ...

signal lights don't work check your fuse box for fuse burnt out, but most likely your signal light flasher switch is out, and needs replacing. Check your manual it will tell you where your signal ...

left side turn signal chevy silverado 2004 not flashing. turn signal or hazards. The right side turn signals flash just fine, both turn signal and hazards. Left side is dead. I get nothing with either

no turn signals in 2006 chevy silverado I have no turn signals or 4 way flashers. wipers and windshield washer fluid work fine. fuses are good. Is it a bad turn signal switch and how do you replace it

silverado 2004 name for part that controls turn signals on towing package It must be stuck as all lights work normal. just the towing lighting line. right turn signal hot all the time. Turn signal ...

2002 Siverado left front turn signal luminating when lights are in use but will not flash when turn signal activated. Rear signal flashes quickly and dash indicator as well. You need to change the ...