Questions & Answers for: Yamaha Road Star side stand

...will start and go into first gear when clutch is let out bikes dies will not go forward CHECK THE SIDESTAND SWITCH AND MAKE SURE IT IS FULLY ENGAGING WHEN THE STAND IS UP OTHERWISE THE ENGINE DIES ...

How do I get to the battery of my 2007 Road Star? On the right side side of the bike there is a compartment with a small hex screw on the bottom left side. Use the larger hex wrench from your tool kit

...12.5 V, TURN IGNITION KEY ON AND NOTHING HAPPENS check clutch lockout switch and side stand switch, check fuses, do you hear a the relay click 2004 yamaha r1 does nothing when hitting start ...

...side stand switch has been bypassed There are a number of safety switches on these models. The clutch switch at the lever, the neutral sensor/switch, and kickstand switch. They all work in tandem, ...

...side stand switch, clutch switch and neutral switch has the following functions: a. It prevents starting when the transmission is in gear and the side stand is up, but the clutch lever is not ...

spoke-wheels-xv17at-intake/o/m145401sch301708 It shows the fuel pipe (item #31) going into the back side of the card (intake manifold side

...the two vacuum hoses hook back up. My Clymer manual shows a sticker that should be on one of the side covers showing vacuum line routing but mine does not have it One line that comes from the top ...

...the engine, transmission, and sprockets transferring that heat to the drive belt, and over time the sides of the belt will become crystallized/glazed into a finish that is harder than "Chicken Lips" ...

...motorcycle? I think my belt is too tight after replacing a tire. There are tensioners on each side of the wheel attached to the axle. They should have notches or numbers stamped on them. Loosen ...

front wheel shakes bad the tire is in good shape.there are no bumps on the tire and the tread is good and tire was balance. Hi,food for thought,have you checked that the wheele bearing is not worn(put