Questions & Answers for: side cover Watches

...cover on one side, then the other, until the cover pops off. The battery is a Renata 379. To put the cover back on, align the square slots precisely with the ends of the straps (keep these out ...

...watch (away from the battery). You need something very small to do this with, like a straight pin. If successful, the cover pops up on one side and then you do the same on the other side. Good

...is held in place by a metal cover that has no screws to remove it. If I try to pry it off, from the sides, I'm concerned I may damage the support. How do I get the battery cover off? The cover is ...

...cover to go on. start by applying pressure to one side of the lid and gradually make your way around the perimeter applying steady pressure as you go. afew snapping sounds let you know progress is ...

...side up). Make sure the o-ring is in its place, as to keep the Suunto waterproof. Place the battery compartment cover back onto the backside of the watch. Insert the quarter back into the coin slot ...

...cover doesnt appears on the back side of the watch it is engraved with the main body of the watch,take it to a sevice centre they have tools through which the back cover gets separted with the main ...

...cover are an "etched" arrow. really stumped. I suggest that arrow points to where the case back should be opened. Check if there are any writings on case back. When the watch's opened back ...

cant get back cover back on use a very small good FLAT OBJECT AND PUT COVER ON ONE SIDE AND THEN WITH TOOL ON OTHER SIDE PULL COVER BACK TOWADS YOU AND FOCE COVER ON

...to the side. *The printer assembly should set into place. *Reinstall the back cover, coaxing the battery connections through their respective holes. Congratulations, your unit is operational

...side of your watch. At the edge of the centre cover, or just under it, there is at 1 place a little notch of a view millimeters. Juse a small screw driver or tweezers for instance to lift it up. If ...