Questions & Answers for: shredder working full

...the shredding teeth and oiling it but the issue kept kept reoccurring. I ended up taking the shredder to a local service company and they ended up replacing the LCD PCB. Now it's working fine! ...

...shredder. It's not full, won't work at all. 'Full light' blinks on and then off when you replace shred basket. Aurora AS1712x shredder. It's not full, won't work at all. The sensor or button that ...

working?! The shredder is on, all lights are on but its not taking any paper or making any noise when the paper is put in to shred, its just not working. you need to make sure that the paper detection

working My shredder won't work at all. Make sure the bin is not full. Make sure the bin is fully pushed in. A shredder will not work if any of the safetys are not properly engaged and for good reasons

...Shredder FULL lamp stays on ALL the time in my C-220, to get it to work, you need to press the "O" button to turn off shredder full lamp and hold down the "l" key to get the shredder to take paper. I ...

...when you remove the bin to empty or clean it.  The shredder will now work but without the bin full sensor so check the bin each time you use the shredder to make sure it's not to

...shredder, says bin full but its not, only half full I had the same problem. I found that the sensor on the shredder is light sensitive. The viewing window in the bin was letting too much light in and ...

...shredder will think the bin is full. It might work if you simply wipe it off. The sensor can be hard to find if it is really dusty, so just wipe off the entire pottom really well. YES, MOST SENSORS ...

My shedder quit working The shredder was working fine, I emptied the basket, and now it will not run check bag full switch and paper flap

WORKING ON C-480C FELLOWES SAFE SENSE SENSOR WON'T WORK ON SHREDDER. IF YOU DISABLE THE SAFESENSE, THE LIGHT WILL FLASH, BUT WHEN ACTVATED IT DOESN'T LIGHT OR STOP THE SHREDDER Use a cotton bud dipped