Questions & Answers for: shredder dm15c fellows

shredder problem paper will not feed into shredder Call us at Fellowes Customer Service 1-800-945-4545 On Monday between 7am and 7pm Central Standard Time my staples spl-1506X turns itself off and on ...

DM15C? There are two sensors (look like little light bulbs) on the top part of the shredder at either end of the blades. If you pull out the drawer and turn the shredder upside down you will see them.

DM15C Shredder Basket full indicator on the basket is empty and start to shred and then stops because the bucket vibrates out just enough to trip the switch-- been like this almost since new. The only

shredder won't turn off at first cleaning the sensor works. Now nothing works except unpluging or turning the power off The sensors probably need replacing. Most larger Fellowes shredders come with a ...

REPLACEMENT INTERMEDIATE DRIVE GEAR FOR NOVITECH PS-026/B2 SHREDDER Get me the model and serial number or just call Fellowes direct. They will sell you the part. If not. Call me with the information ...

Shredder starts to shred, then makes a loud noise, and blades don't turn sounds like a couple of teeth on a drive gear may be broken. call Fellows at1-800-955-0959.

shredder will not shred my shredder will not shred but will go in reverse look for the paper sensor and make sure it is there and working correctly

shredder tech out of colorado. Call fellows at 800-955-0959 There area couple of LEDs inside. One at each end of the black plastic housing.  They have two mounting screws next to them.  They

broken off DB-0812D mini-transformer from PS 67Cs Fellowes shredder Purchase a 220/240 volt to 15.6/15.6 volt transformer and run flying wires as it will probably be larger in physical size.I used a ...

...DM15C. And is there any other maintenance that should be done. The manual was very sparse about maintenance. Fellows does have its own brand of shredder oil that you can use .... but most brands will ...