Questions & Answers for: short circuit print head

...short circuit or similar. I do have the same problem. When i checked the printheads, i came to know that electrical circuit was damaged. Do one thing. Clean copper contacts of both printheads with a ...

...print head with new one. Rarely, short circuit in the print head might cause the problem. Regards, Source: Canon Inkjet Printer Forum Try replacing ink cartridges. sounds like the nozzles are

...Short test detected short circuit in printhead. Fix is to replace print cartridge(s). Sounds like one or both of your new cartridges are defective and need to be returned to where you purchased

short circuit at head cable. Check board first, may be some component "burn".Better to take printer to epson service center. Damage board can be replaced, but it must to check the cable head and small

...short circuit at head, cause of ink leakage. If you have experience with electronic circuit, check voltage output at wire to head, check small circuit at carriage. Then check the electricity at ...

...short circuit at head. Track on aicaxz solution for reference to repair board. Note: if you have experience in electrical circuit, test mounted fuse at board. I have put in new cartridges and now the ...

...cause a short circuit when comletely to the left, check the flat plastic cable that is connected to the print head for ware and exposed wires that can touch any parts of the metal frame. Good

what is error 1203? Error code 1203 on this printer model is a Shorted print head circuit, this can be the cartridge (most common) or it can be the print head floating ribbon is shorted.

epson9880 no ink sent to print head no ink sent to print head at all?problem with printer mainboard, usually caused by short circuit in head, then "burn" the fuse in mainboard.

...ANY Ideas? There is a possible short circuit over the printer head system due to moisture content caused by the previous action. Remove the printer head, power the printer, check the what