Questions & Answers for: shop vac wet dry vacuum

Question about Duet GHW9150P Front Load Washer

1 Answer

...shop vac, you can minimize this mess by taking the drain hose form the standpipe at the wall and pulling a vacuum on the line to drain all the water. There's about a gallon of water that remains in ...

Ad

Question about Elite 45986 Front Load Washer

1 Answer

...shop vac it will come in very handy to drain any residual water inside the wash tub. There's about a gallon of water that can remain in the wash tub and drain hose lines (this is normal). If you pull ...

Ad

Question about Affinity ATF6000F Front Load Washer

2 Answers

...shop vac and pull a vacuum on the drain hose at the wall. This will pull and remaining water from the tub and drain lines. Otherwise, you will need to lay down some towels. NOTE: It is normal to have ...

Question about ShopVac 3 HP 2 Stage 10 Gallon--Automotive Wet/Dry Vacuum Vacuum

2 Answers

...Shop.Vac 3.0 but I don't have the instruction booklet. Do I take off the pleated "paper" filter to vacuum up water? Do I use the vac with no filter for liquid? Yes you should remove the filter for ...

Question about MFW9800TW Front Load Washer

2 Answers

...shop vac. If you do not own a shop vac, you will need to lay down some towels before removing the clean out trap on the pump to catch the gallon or so of water that will pour out. NOTE: You may also ...

shop vac, remove the drain hose from the standpipe at the wall and pull a vacuum with the shop vac. This will empty the wash tub, pump and drain lines. If you don?t own a shop vac, grab a bunch of old

Question about Ultimate Care II LSQ9564J Top Load Washer

1 Answer

shop vac and see if you can pull water through the drain hose in the back. If you can, duct tape the vacuum nozzle to the drain hose to make a good seal. With the vacuum on, watch the drain hose under

Question about Ultimate Care II LSQ9564J Top Load Washer

1 Answer

...shop vac get it! Start pouring in water and vacuum it out. If you can remove the impeller assembly in the bottom center do it. You also might want to blow ait thru the drain hose back into the ...

Question about 9 Gallon Wet/Dry Shop Vac 96882 Canister Vacuum

1 Answer

...shop vac does not seem to have as much pick up power as it once did. It will not even pick up small debris and paper. Turning the unit on with the motor NOT inserted into the "can" do you see the ...

shop vac make a high pitched whistle with a long hose on it but not a short hose? The high pitched whistle that you are hearing from your Rigid shop vac with a long hose may be due to several reasons.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...