...you have a shop vac use it to stuck any thing out of the tub hose,(i just had a guy **** out a sock) there is a filter there also that should be checked and cleaned,let me know how you ...
Question about 925-13 Canister Wet/Dry Vacuum
...shop vac hose? I tried to blow it out but the clog got stuck in the middle of the hose. Then I tried sticking a long stick down it but that didn't work either. try a water hose to flush the stuff ...
Question about 23913 Progressive PowerMate Bagged Canister Vacuum
...object in hose depending where the object is stuck a wire coat hanger might be of some help, otherwise try a borrowing a shop vac from someone and connect from the handle side of the hose, good ...
Question about Kreepy Krauly In-Ground Pool Cleaner
...shop vac hose stuck on a flat surface. the pad has grooves which allow water to flow in and it slides easier, like angling the shop vac hose a bit so you can slide it. Aside from this their could be ...
Question about Duet GHW9150P Front Load Washer
...shop vac,vac out all the water in the tub,next put down some towels on the floor and around the pump and have the shop vac ready,unscrew the middle part of the pump just enough to have water draining ...
...shop vac, hold the wall end to the exhaust of the vacuum and the wand end to the in port of the shop vac. Turn shop vac on and the obstruction should come out. Borrow a good strong shop vacuum if you ...
shop vac remove the hose from the bottom of the sink or garbage disposal and attach the shop vac to this hose and drian the machine.Then you will need to check the drain pump,the is also a chance that
shop vac), put your shop vac hose onto the exhaust and direct it into your other vacuum. Some vacuums allow you attach something to the exhaust, but many have abandoned this very handy design feature.
Question about Shop Vac 8 Gallon Replacement Filter
...shop-vac stopped mid-job with no warning What could cause it to stop? Maybe it over heated or the hose was jammed. Unplug it for a few minutes, check the hose for any stuck debris, then plug it back ...
...shop vac 4.0 has no suction If the motor is turning on then the issue is one of three things blocked exhaust, blocked intake or the fan that moves the air is loose on the motor . The last doesn't ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions
