Questions & Answers for: shifter cable

Ad

Question about 2000 Grand Cherokee

1 Answer

shifter cable change out have a 2000 jeep grand cherokee. shifter stuck in park. jeep was bought used. checked cable at tranny and the cable had a zip tie holding the cable together(zip tie broke ...

Ad

Question about Shimano Deore Bicycle Shifter/brake Lever Part 100

1 Answer

...cable thru the shifter and thru the frame and down thru the derailer or will the shifter **** apart. It depends.. Shifter cables are standard and the same one would work for both LX and XT shifters. ...

Ad

Question about 2000 Impala

2 Answers

shifter cable installed. And now its stuck in second gear. The shifter goes up and down but it's not catching which leaves it stuck in second gear! Please help Greatly appreciated I have work at 7 and

cable out of the shifter from the exposed area of the cable, then pull once you can reach the end of the cable. 5.Install a new cable. Depending on the reason you have removed the cable, it is advised

Question about Deore Xt Thumb Shifters 7 Spd.mountain Bike

1 Answer

...cable into the shifter. You should see the cable end start emerging from the opposite side of the shifter. Pull it all the way out but make sure you take note of its routing to its derailleur. Lube a ...

...shifter cable came off and I had to put it in park myself. I noticed at the end of the shifter cable that the round plastic washer at the end of the cable broke. How can I find that plastic part. I ...

Question about 1997 Sunfire

1 Answer

shifter.One cable is the neutral gate position,and the other is the actual gear selector cable.Manually operate the cables and see if the gears will engage using the cables.If the cables work,you have

shifter cable needs to be replaced. I called Auto Zone and they have 3 different parts available. Performance Shifter Cable, Stroke Shifter Cable, and Adjustable Single Shifter Cable. Which do I need?

Question about 2001 Escape

1 Answer

...shifter cable or the shifter itself. to find out which one you will need to disconnect cable at sifter and then move the shifter to see if its still tight. if the shifter is tight to move with cable ...

transmission Maybe shifter cable came off of the shifter inside the console ! Sometimes plastic break that hold the cable to shifter lever or down at the transmission or maybe the shifter cable broke

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

john h

Level 3 Expert

23438 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...