...adjustment. If this is a column shift car the mechanical linkage may have shifted from hitting a bump or such. Hope this helps, let me know if I may be of further assistance. Thanks; Rich RPM ...
...shift linkage comes in)you can test this to make sure its working but it will require conituity tester,a parts store might also test it for free,this is a $100+ dollar switch,so if needs to be ...
tranny struggles to shift to 2nd gear on fast take offs only sometimes on normal take off. fluid looks good and no leaks. i hope my tranny dosnt need replaced, its my only car and work is 20 miles ...
...shift control linkage from the mounting bracket at the transaxle and the lever at the manual shaft. Label and detach the connectors from the following: Park/neutral/backup lamp switch. Transaxle ...
...the fuses - Try turning the key to the 1st (unlock) postion shift to neutral to start and then shift to Drive Check the shifter interlock switch on the brake pedal. Possible linkage problems
shift into gears. Is this a blown transmission Check for fluid on the end of the transmission dipstick. If there is none, then try adding some until there is some on the end of the stick when checking
...shift selector down into low and bring it but up to the park position, fast and hard, what is the problem? Thank you Rich shifter linkage needs adjustment or something has fallen in to shifter ...
Question about 1986 LeSabre
...shift selector rod in automatic transmission 1986 buick lesabre while changing linkage bracket, broke gear selector rod in automatic transmission is it broke off clean ? or is just the ball broke off ...
...check fluid condition first if good check for linkage and selector switch positions, also possible shift soloniod problem, if fluid is burned or smells burned you will need to remove trans for ...
Usually answered in minutes!
1,731 Questions
1,603 Questions
1,084 Questions
904 Questions
897 Questions
