Questions & Answers for: Chevrolet Blazer shift button

Question about 1994 S-10 Blazer

1 Answer

...button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of ...

Ad

shifting out of 4 wheel drive electric shift on 1998 gmc jimmy i have to keep playing with buttons to get it to shift check the control module located behind pass.side kick panel undo connector plug ...

Ad

Question about 1999 Blazer

1 Answer

2000 Chevy Blazer stuck in 4L My 2000 Chevy Blazer shifted itself into 4L and now I cant get it into 2H. Its a push button (4 Button) 4 wheel drive system. try putting in neutral then try shifting in ...

...button panel and indicator light, the shift control module, and the shift control motor. The shift control motor is the only part that can draw enough current to blow the fuse. If for some reason the ...

...button to try and shift it out 4 lo it sounded like it was trying, but it shifted right back to 4 lo and the service light came on. your high low range shift solenoid is out!! change it! Try putting ...

...type of drive will be lighted. Generally you would like to be in 2wd for this vehicle. If it's in 4 wheel low, you have to put the car in Neutral and push the 2wd button to get it to shift

shift select button has been pressed, the four-wheel drive indicator lamp under the sift select button turns ON when the front axle has engaged. The shift select button will blink while the front axle

shift into ne utral, push button on dash for (2-high) and it will go right back into that and continue on. (back to home, cause afraid to drive it then). What's the problem child? Is it the buttons on

Question about 1999 Blazer

1 Answer

...button or a shift lever in the floor . You can shift from 2hi to 4hi running up to 50 mph without stoping . To shift into 4 low the vehicle must be completely stopped and in neutral . You shift it be ...

...button. it flashes while it is attempting to shift you should hear a shifting clunk or whirring noise, then the light will stay lit. after shifting from 2 wheel drive to 4 wheel drive shift into ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...