sherwood rx-4109 power shuts off i've made the proper connections to my sherwood rx-4109, but as soon as i turn on any component the receiver shuts off. in the beginning i thought it was the timer, ...
sherwood rx-4105 output transistors I am looking for output transistors for this stereo,one is b2510,the other d1510.Have had no luck,are there any crosses? Thanks,Alex. You can also use 2SD2560 and ...
Sherwood RV-8070R, i can t switch it on Hello, could someone please help me. when I switch on the receiver, it comes back to Standby after 1 second.... It sounds as a small or a big problem? Eddy TRY ...
...sherwood xr-4109) turns off as soon as it turns on Check the speaker wiring in the back. Make sure it is not wired improperly. You could remove the speaker wiring from the back of the amp and see if ...
Sherwood RX-4109 . . . I have to keep volume very low or it will shut itself off. Any help to correct this problem would be appreciated. If Both speakers are working at a low volume and you turn it up
Sherwood RX-4109 receiver has no sound. Right speaker had no sound, and I tried to see if switching speaker connections in back receiver would help, but now neither speaker works, and there is not any
Question about RX-4109 Stereo Receiver Black
Why do my right speaker inputs cause fuzzy sound? dear hopeful savior, the right speaker inputs seem to not be working right. no matter how many times i swap out speaker cable, try a different speaker
Sherwood RX 4109. I have a spontaneous turning off problem as well but it seems different than what others report; more related to the button switch, which keeps popping out from the on position. The ...
...the source balance if the setting is available is set to middle On many upgrade receivers as this Sherwood there is a test feature that confirms with an audio beep the speaker balance and ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions