...sheets in the dryer they end up in a tight ball wound together and not dry. Is it the back and forth motion? Is there a setting for large items? It doesn't seem to matter which setting I use: Extra ...
...sheets come out very twisted and balled on the ends, with other clothes traped in them, leaving them wet after recomended drying times. Any idea? I hate the wrinkles and end up re-drying. Thanks dry ...
Question about Profile DPSB613G Gas Dryer
dryer says king size capacity. I've tried to do one set of sheets at a time, two sets at a time, one set of sheet and some extra clothes mixed in...always the same... a wrinkled up wet ball of sheets.
Question about DV448AEE Electric Dryer
sheets and bedding get balled up in dryer and don't get dry. I have added towels to the bedding to help prevent the balling issue but this doesn't help. The bedspread and sheets get into very tight ...
...sheets and blankets from getting wrapped into a ball as this prevents drying You can put one or two tennis balls in with them. There are also dryer "balls" that stores sell but tennis balls work
...sheets (only thing in load) are getting tangled in a ball in the dryer and not getting dry. This is pretty common with lighter fabrics and is easily remedied. Put several new tennis balls in with the ...
...dryer sheets can I use I would not recommend using dryer sheets at all to be honest. The best alternative, although a bit noisy, are the dryer balls. They are a little smaller than a tennis ball and ...
...dryer sheets. We would love to have you as our customer. We know that the Dwadder will save you time, money and lower the frustration of drying laundry. For more information and videos on how to ...
close ball up and wont dry throught out large blankets and sheets will ball up and you need to check often and un ball , has there been any work done on dryer /, If drum too fast cloths will ball up
Question about DV218AEW Electric Dryer
...until they come back with no color. Do this especially if you use dryer sheets. Those sheets end up coating the sensor with a film and then the sensors will not detect the moisture. Hope this
Usually answered in minutes!
1,743 Questions
1,329 Questions
1,410 Questions
1,123 Questions
940 Questions
