...sharp 20 tv shut down some times some times it work for 4to5 hours before it shut down and other time it take longer My problem was not overheating, it was a circuit board issue. They replaced both ...
Question about 56DR650 56" Rear Projection HDTV
Sharp 56DR650 shows power but wont turn on, Sometimes it turns on Hi all I just changed the bulb about 2 weeks ago and now I the TV shoots some codes at me, Power: 3 green blinking lights and 2 reds. ...
Question about Aquos LC-32D40U Television
...tv turns on then shuts off right away and the power light turns orange then starts blinking green? what do we do? if you have sound, search "picture goes black" on this site and you should find easy ...
...TV will come on for literally 5 seconds then shuts off. I have unplugged and replugged, held the power button for 10 seconds and the light turns orange then it turns red. Is this TV ready for the ...
...Sharp LC-46E77UN TV. Remote will start TV green light on. No picture, just stays black. PVR is on and connected to TV via HDMI cable. Cannot turn off green light. Must use power button on TV and hold ...
tv shuts of it self and the two lil green light blink...we put the tv power button back on and it works fine for like 5 min then shuts off again with the green lights blinking. The tv main logic board
...shuts off and power light blinks. Approx. 45 seconds after turning on T.V. I lose picture and within another 10 seconds I lose sound and the green power light blinks. If I manually hold down power ...
Question about Aquos LC-42D62U 42 in. LCD HDTV
constant flashing of green led light on front of tv the green led light is blinking constantly I have a plasma that does the same thing. I don't know but have been told it is probably the power supply
TV will not stay on When I plug my Sharp LC37SB24U the green LED power light blinks once a second I hold the power button down for 5-10 seconds and the LED power light will change to red then I let ...
Question about LC37SB24U 37 in. LCD TV
...tv is a LC52D64U sharp aquos, Tried reset procedure holding down input and volume \/,it will not enter factory set up. it, clicks on,screen will flicker about 5 times then goes black the green light ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions