...SHARP AL 1631 I REPLACED THE FUSER LAMP AND ERROR CODE STILL BLINKING H3. H3: 00:TEMPERATURE OF FUSER UNIT HIGH,THERMISTOR CONTROL BOARD FAILING Did you replace the thermistor? check the thermofuse ...
Sharp AL 1631 I have an E7 error code what is this and do I make it go away. E7 has to do with the scanner. Make sure it isn't locked up or binding.
sharp al 1631 error code "CH" it is signal door open or cartridge unite not atast think its door switch /dv unit not installed properly
Sharp AL 1631 is flashing 1 L. What does that Sharp AL 1631 is flashing 1 L. What does that code mean and how do I solve it? Hi: This might refer to your scanner assy being locked. The scanner assy is
sharp al 1631 error code l-1 The problem it in exposere lamp section.The forward scan is not compelet.Cause is the mirror motor control board or mechanical parts. al-1631 coper will not clear misfeed
Sharp AL-1631 Fuser Unit I installed a fuser unit in my Sharp AL-1631 and change fuser warning did not go away. Is there a reset i shouold know about. thanks The fuser codes are only H2,H3 and H4. To ...
Buyer transported the machine without removing the toner toner spread all over and machine needs to be reset. What is the code. machine is AL Sharp 1631. Thanks sharp sf 1118 show errore 04
Sharp al 1631 need drum roller reset code Sharp al 1631 shuts down, need to know roller reset code. At 18,000 copies it shuts down the copier as per the manual. We are in Africa and cannot get a new ...
I HAVE A SHARP AL 1631, IT SHOW ME A 4 CODE, HOW CAN I TO SOLVE THIS their is no A4 code,if you mean H4 try to reset it by simulation 14
Question about AL 100DR Laser Toner Drum Works for AL-1631 AL-1631P AL-1631RF AL-1641
I have Sharp copier model 1631. it stopped working and code flashing alternatively L& 1 Exposure lamp error. for error LI-00 change the flex
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions