Questions & Answers for: sharp al 1000 copier

sharp al 1000 shows E and 7 and hangs off my sharp al 1000 printer shows "E" and "7" and hangs after that.plse help me to rectify this problem at the earliest. if a number and alphabeth appears ...

...sharp AL 1000 sharp AL-1000 will return the copy lamp unit to home position and then jeck front back for 58 times before it flashes E and 7. what is the cause of the problem. thanks Sounds like the ...

...sharp AL 1000 flashaing E and 7 sharp AL-1000 will return the copy lamp unit to home position and then jeck front back for 58 times before it flashes E and 7. what is the cause of the problem. thanks ...

Sharp AL-1000 copier Hi, I have a Sharp AL-1000 (Digal Laser Copier). My copier has a flashing letter L and number 6. Please give me advices ASAP. Thanks, Hen The L-6 indicates there is a problem with

...SHARP AL-1000 PRINTER IS PRINTNG VERY FEINT the printing on my sharp AL-1000 is feint, is it the toner or drum I should replace ? Both are quite expensive so I need to make sure, Thank you Could be ...

...sharp AL-1000 copier. When turned on, a very loud whining noise comes from left side. It is not the fan or the motherboard. I can still make copies though. Any ideas? Clean waste ink or replace TD ...

...Sharp al 1000 with error message L6 which means Polygon mirror motor not up to speed? How is this fixed and what cost? Since the polygon motor is part of the laser unit, it would cost about $200 plus ...

...on Sharp AL-1000 keeps blinking will not copy. It most likely is out of toner. Does it run and run and run when you turn it on ? It should " warm up " in a minute or less. If so, the toner is ...

Sharp AL-1000 error E7 E7 is CCD drive circuit trouble. Refer to the manual obtainable from mauritron How can error E7 be cleared on sharp copier AL-1000

I have a sharp AL - 1000 PRINTER DISPLAYING ERROR MESSAGE E7. What is the solution please ? See This: http://olsonbros.com/sharp/support/pdf_trbl/trbl-al1000_1010.pdf