Question about Sewing Machines
Sewing machine struggling to run or sewing slowly with no load The neddle runs slow, or struggles to run even when there isnt any material there. It was running fine while sewing tapestry type materal
sewing machine doesnt switch off keeps running slowly Thanks for return email. I took the machine to an Elna dealer who fixed the problem by by-passing the (small board) switch that returns the needle
...sewing perfect stitches, but it started running very slowly. I cleaned all the lint out under the bobbin, but its still running slowly. What else can I do? My manual says it is not necessary to ...
machine running slowly pfaff creative 1475 running slowly and stopping Try cleaning & oiling. Make sure your cord not damaged and connection to wall secure. Jimmy
Question about Quantum 9920 Computerized Sewing Machine
...to sew very slowly then stops When I press the foot controller, the machine will laboriously run for 3 or 4 stitches, then stop and sound as if it is trying to run. Sometimes it just needs
Question about 15516 Mechanical Sewing Machine
After I threaded the bobbin on my 158.15250 kenmore sewing machine, now my machine runs slowly How do I fix this problem If you turn the handwheel by hand is it stiff?
Question about 15516 Mechanical Sewing Machine
...sewing machine oil or Tri-Flow Synthetic Lube. Open the top, left side, and bottom of the machine. Slightly rock the handwheel and apply 1-2 drops of oil every place metal rubs on metal. Do NOT oil ...
Question about 15516 Mechanical Sewing Machine
sewing machine is running very slowly and the wheel is very hard to turn... If it's an older mechanical machine, how long since its last clean and thorough lube? The machine is probably seizing due to
Question about 15516 Mechanical Sewing Machine
sewing machine model 158 running slowly Most likely it is seizing due to old oil that has dried. Avoid trying to use it until you get it serviced or the motor may be damaged. Your sewing machine needs
Question about 15516 Mechanical Sewing Machine
...sewing machine needs a hand tug to get it running every time after pressing the foot pedal, it could be due to several reasons. Here are some steps you can take to service the machine: Clean the ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions