...advance, causing thread to jam up. The teeth are all the way up and everything is clean of lint. The machine feeds fabric if I trial run it through without thread, however as soon as I add thread is ...
Question about 15218 Mechanical Sewing Machine
...sewing machine Was trying to sew the 'fly' part of a pair of jean when the thread keep snapping and in the process, have also broken the needle. The sewing machine model is Ericco 9800 (industrial) ...
sewing machine and the a needle broke now thhe feed dog will not advance the material when I sew. The feed dog goes forward but will not go up and down. Call Singer at 1-800-4singer and they will help
...Sewing Machine (1975) I would like to thread the machine, and it seems like the clothes advancing mechanism is not moving/advancing the material, why? Tony the feed dogs are what pushes on the ...
...machine before but now the material does not advance. The straight stitch foot does not work either. The feed dogs are moving up and down - seemingly working properly. Why won't the material advance? ...
Question about 1740 Mechanical Sewing Machine
sewing surface to move the material. Another thing could be that the stitch length lever is set on "0". This is basically telling your machine not to advance any material through it and you will get a
Question about Advance 7422 Electronic Sewing Machine Refurbished 7422.RF Advance Sewing Machine Refurbished
...or possibly a burr on the hook. Lay a peice of scrap material under the foot as if you were going to sew, remove needle, then run machine in reverse to see if it feeds material backwards as it ...
Question about 2037 Mechanical Sewing Machine
...sewing machine model 2037 foot dog is stuck down. My material won't advance how to fix. www.fixya.com/support/t27227243-white_sewing_machine_model_2037_foot_dog 5 days ago - My material won't advance ...
Question about 2037 Mechanical Sewing Machine
Foot feed on my Stylist 834 are stuck down and won't advance material when sew a seam. have try to use a good material?
...sewing machine does not come with a mechanism to drop the feet used to advance the material however the symptoms I am experiencing acts as if the feet are disengaged. Make sure to clean any lint ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions