Questions & Answers for: setting time shock protection

Question about CT-27HL14 27" TV

1 Answer

picture goes out frequently This is actually a Panasonic CT-27614A model - but it's likely close enough. The picture will go out, but I took the screws out of the clamshell & separated it slightly - ...

Ad

Question about WS-55819 55" Rear Projection Television

2 Answers

Mitsubishi WS-55819 power issue My 5 year old Mitsubishi WS-55819 projection TV has a power problem. When I press the power button it turns on for about 2 seconds and then turns itself off. The ...

Ad

...shock protection, an environmental protection system and real-time embedded error detection and repair. WD's Data Lifeguard technology automatically finds, isolates, and repairs problems that may ...

Question about PVS31170S1W 17 in. LCD Television

3 Answers

...shock this not cost too much because only reheating works... Hi, It is unlikely to be just a fuse since as you posted, the red light is lit. Other than a reset (unplug for some time/hours), there is ...

...time, remove both rear springs as outlined under Rear Spring Removal. For air spring removal, refer to Section 04-05 . Mark rear suspension shock absorber relative to protective sleeve with the ...

Question about Daytona 116520 Wrist Watch

1 Answer

...shock resistant, antimagnetic and water resistant. It achieves water resistance through its triplock system winding crown. You must first turn the watch crown counterclockwise until it releases from ...

Question about Magnavox 52MF437S/37 52 in. LCD TV

1 Answer

...shock from its capacitors for some time after the plug is removed. If this doesn't work, there are a number of companies that have the special equipment necessary to replace damaged panel drivers. ...

Question about DFP14 Food Processor

1 Answer

...protection devices to operate if there is a fault between live parts (other than Neutral) and the mass of earth. What to check: For class (one) 1 protectively earthed appliances only, test for very ...

Question about TCP46C2 46 in Plasma TV

1 Answer

...shock Someone had put a blanket over our plasma tv with the tv on.. the tv was set on a timer and turned off at the correct time however now the tv will not turn back on. I think the blanket may have ...

...setting. just one element can fail. Dryer Taking Too Long To Dry Clothes - GE Appliances products.geappliances.com/appliance/gea-support-search-content?... To minimize the possibility of electric ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...