Questions & Answers for: setting date time brother intellifax

...Date and Time Year:2007 Month:03 Day:01 Time:15:25 If you make a mistake, press Stop/Exit to start from Step 1. 7 Set your Station ID Fax:_ Tel:_ Name:_ ■ Refer to the following chart for ...

...time date and fax status. We can't enter the menu setup to change any settings - it just beeps. However it does receive faxs it just won't let us send any. By the way it is on a remote site so I'm ...

...date and time on an Intellifax 2820? Look on page 8, item 6 Set Date and Time in this link to your Brother Intellifax 2820 machine. ...

...date and time on the Brother Intellifax-2820. 1 Press Menu/Set. 2 Press 0. 3 Press 2. 4 Enter the last two digits of the year on the dial pad, and then press Menu/Set. (e.g. Enter 0, 7 for 2007.) 5 ...

time and date of transmission and whether the transmission was successful (OK). If you select On or On+Image, the report will print for every fax you send. If you send a lot of faxes to the same place

...Setting the Date and Time Your FAX/MFC displays the date and time and prints it on every fax you send. In the event of a power failure, you may have to reset the date and time. All other settings ...

sure you have set the correct date and time in the Date/Time setting. 1 Press Menu/Set, 1, 5. [5. Auto Daylight] 2 Press Up Arrow or Down Arrow to select On (or Off). Press Menu/Set. 3 Press Stop/Exit

...a 2820 intellifax. and CAnnot figure out How to set the time and date so that they are on items faxed out..help Hi:Press Menu/Set , 0 , 2  Follow prompts, Press Menu/Set after each ...

...Setting the Date and Time Your FAX/MFC displays the date and time and prints it on every fax you send. In the event of a power failure, you may have to reset the date and time. All other settings ...

...to "Print Report" - Press OKNavigate to "Reprint Faxes" - Press OK"Reprint All Faxes" - Press OKOr Navigate to "Reprint One" - Press OK Navigate to Date/Time Received of fax to reprint - Press ...