Setting Alarm 2 for Nature Sounds/Buzzer 1. Press and hold the 7 Nature Sounds/Buzzer Alarm 2 Button until the Alarm 2 settings and Sounds Alarm Indicator appear on the display. 2. Press the 1 Reverse
...setting Alarm 2. Note: The Alarm 2 indicator must be flashing while setting Alarm 2 wake up time or sound. To set Alarm 2 wake up time, hold down ALARM SET and press either TUNING button For manual ...
...setting the alarm, be sure that the correct date is set. 5. After you have set the radio alarm wake time, wake sound, and 7-5-2 setting, press the "Alarm Set" Button twice so that the display shows ...
...alarm volume setting, days if the week to sound, snooze option and auto power on/off setting. 3. Highlight the options you wish to change, then select values for the options using the Left and Right ...
...Alarm Setting: Alarm functions can be cancelled: Select alarm system 1 or 2 by pressing the alarm button [14] or [15]. Display will blink with selected alarm Press alarm set button [16] Display will ...
...setting. Press the ALARM 1 or ALARM 2button again (or wait approx. 15 seconds). 3. Repeatedly press the ALARM 1 or ALARM 2 button to select alarm off, alarm on, for buzzer, radio or CD. If you needed ...
How to set and remove alarm set how can I turn off alarm BOSE WAVE RADIO Turning on/off the alarms To turn alarm 1 on/off, follow these steps: Turn the system off On the radio, repeatedly press the ...
Question about Sports Ironman Triathlon 100-Lap 66801 Wristwatch
How do I unhide alarms 2 and 3? Set multiple alarms. If any alarm is active,(picture of alarm hear) appears in time display A. Press MODE repeatedly until ALARM appears, followed by ALM1. Press ...
Question about Sports Ironman Triathlon 100-Lap 66801 Wristwatch
...setting...alarm/page.html Bose CorporationLearn how to properly set and use Alarm 1 and Alarm 2 by following these ... There are two alarms indicated on the clock display as ALARM (primary) and ... ...
Question about Sports Ironman Triathlon 100-Lap 66801 Wristwatch
...alarm mode setting. 6. Press the "+" or "-" button to choose the desired alarm mode (i.e. one time, daily, or weekdays). 7. Press the SET/RESET button to confirm and activate the alarm. The ALARM ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions