set the tension to 4,5 and rethread the machineup to needle then put the presser foot down but the machine sewing the cloth correct way for 6 ,7 stitch only then same problem i facing plzs tell me. hi
Question about 1120 Mechanical Sewing Machine
...The top tension dial is usually standard set on #3. The rest have nothing to do with tensions but make sure that your foot that you put the fabric under is up before you start threading the ...
Set the tension to the number recommended in the manual for the type of fabric you are sewing. The manual will also indicate the needle size according to fabric. Make sure when you change needles that
...Tension on a serger kenmore Open the tensions (set at zero) and have the presser foot up when threading. Make sure the antenna if fully extended. Turn the handwheel so the upper looper is at it's ...
tension settings are set to the medium setting. (Usually 4 or 5) If this still does not help, then turn the top tension knob up (from 5 to 6,7,8,9....) -If that still doesn't do it, your probably need
...tension it is set at. Set at 5 ok as i sew it gets tighter untill i end up setting the tension to 0 to have perfect tension. What is happening and how do i fix it. the tension dial may be going out ...
...tension has been set correctly at the factory, so you do not need to adjust it. Please note: - Proper tension setting is important for strong seams. - There is no single tension setting appropriate ...
Question about 4423 Sewing Machine
...set the tension at four. ***Set the bobbin tension. Attachment gives instructions. Now that all of the tension has been set you can try for First thing to try is installing a brand new needle that is ...
Question about 4423 Sewing Machine
...tension to set. You need to increase the tension. Increase in small incraments. Make sure that the thread is seated all the way in the tension disk. Remove the upper thread, always raise the presser ...
Question about 4423 Sewing Machine
...set the tension tighter It is a tension issue, but not as Bill described. It is bird nesting because the thread is not completely seated in the tension mechanism. Remove the top thread from the ...
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions