Questions & Answers for: set source phillips tv

...source unavailable". Anyone know how to set this up?...Im trying to get 2 PS2's on the screen at the same time. Thanks. Hello, please try this link: ...

...source and cable but no luck. I'd appreciate any help! Thanks, Andrew 1. Ensure the TV is set to "home" mode in the user menu. If set to "Shop" it will not retain audio settings change 2. verify that ...

...Phillips Magnavox TV. There's no setting on the TV that toggles between TV/video. any suggestions? On most of the older sets the video input is found by channeling down below channel 2 where you will ...

...source. IE another cable box, xbox 360 dvd play etc. If all else fails, change SSB or Scaler. Depending on the set. It'll be one or the other. I don't have my information with me at the moment to ...

...Set the TV to the channel specified by the service provider.Change the channels at the Cable or Satellite box to view the program.If you are using a video connection (CVBS, S-Video, YPbPr, HDMI) from ...

...of cable box to (in) on vcr another short cable wire connect to (out) of vcr to the tv....Note both the TV and VCR must be set to Ch 3 and TV source will be cable not air.... feel free to rate ...

...set the digital source for the input (Press together Fast Rewind and Stop > Setup > Digital Source) or the decorder (next option in Setup). If you do not have the original remote, you will need ...

recently troubleshooting only to find that it was the tv's source that wasn't set properly and I was trying to change the receiver's settings instead of the tv's source.Hope that helps

set up because it's not the problem of TV, it's the source. Whether it is TV programs or movies and TV series on the network, the first thing to see the source of the resolution, the closer to 4K, the

I have a phillips hts3440 and a Samsung TV...no sound check input or source also check audio settings