Questions & Answers for: set rings Cars & Trucks


how to set up the ring and pinion gear i am going to set up a set of 411 gears in my 86 camaro and wanted to know what it wear pattern is to be for it is noisy and want to get it set up right . thanks


how do i fit rings to my hyundai lantra 1.8, also wrench setting for engine. I am fitting new genuine rings to my hyundai lantra 1.8, but unfortunately the rings didn't come with any instructions. ...


...set of genuine piston rings, but unfortunately they do not come with any instructions eg. which ring goes where on the piston and what way up , i am ok with the oil ring just the compression rings , ...

I cannot hear my phone ring. It is set to high I cannot hear my phone ring. It is set to high ring tone. The phone will buzz on that setting, but no ring Look for a setting that changes the ring from ...

...wire connector. With new bulb in hand, carefully connect the wiring to back of bulb and carefully set in place. While holding the bulb in place, set retaining ring back in place over bulb and

...there. Oil groove is always much wider than any other ring groove. Stock pistons with 4 ring

hi what is the crank and conrond torque settings for a nissan RB30et and what the ring gap set that I'm rebuilding a standard nissan RB30et and I need to know what the torque settings are and ...

...set of rings for a talon silver eagle sure fire 145 model am3058 get the bore size and ring thickness and go on line to the catalogue for mogul rings or other ring manufacturing companies. Rings are ...

Are the piston rings on my Hyundai atos 2008 1.1 standard rings set or pressed ring set Piston rings are not pressed on.

rings push up and turn at same time. set rail and injector into manfold be sure to put something between manfold and rail to keep it in line with hole ,tap each injector one time to set o ring in hole

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides