Questions & Answers for: set pulse

Ad

Question about 29439GE2 Corded Phone

1 Answer

Set the TONE/PULSE selection to PULSE if you have pulse (rotary). If you don't know which type of service you have (pulse or tone), check with your phone company. To program TONE/PULSE for all 3 lines

Ad

...set to tone or pulse dialing: 1. Press and hold the program button for two seconds. You will hear a beep. 2. Press the *tone button to select Tone Dialing or press #pause to select Pulse Dialing. 3. ...

Ad

Question about Cordless Phone

1 Answer

...pulse Hi, How do you set a cordless telephone to pulse? This is a GE product, Model #26730GE1-A. Thanks. Doug Please try this... Setting for Tone: Phone is OFF, then press and hold CHANNEL button for ...

Question about Cordless Phone

1 Answer

...set for pulse dialing on this phone? GE cordless telephone Model #26730GE1-A Setting for Tone: Phone is OFF, then press and hold CHANNEL button for 2 secs until beeps, then press TONE * Setting for ...

Question about Cordless Phone

5 Answers

...set to tone or pulse dialing: 1. Press and hold the program button for two seconds. You will hear a beep. 2. Press the *tone button to select Tone Dialing or press #pause to select Pulse Dialing. 3. ...

Question about DECT 6.0 Cordless Telephone Expansion Handset

1 Answer

...set your phone on pulse it works like a switch on/off 1 pulse for number 1, 9 pulses for n9 and so and so. When you set it on tone each number has a different tone, differnet sound frequency. You ...

Question about FAX-575 Plain Paper Thermal

1 Answer

...doesn't appear among the commands on my fax machine. HELLO! YOU WILL NEED TO GO INTO THE SET OF THE MACHINE, THERE IS SECTION THAT WILL ASK YOU PULSE OR TONE PUSH TONE THEN THE SET BUTTON GOOD ...

...set the pulse/tone dialing feature to pulse for a Ricoh 4430L. How do I change it ? Option setting within "Setup" menu (need access code of 2222) allows you to see advanced features not normally ...

Question about Thermadyne Inverter Stick/TIG Welder 185 AC/DC

1 Answer

...set pulse width 60%, peak current 100, background current 30, Hz 1.0 1/8" (.125) - pre-flow .1 sec., hot start 20, amperage 150, Hz 80, balance 20%, post-flow 6.0 sec. For pulse settings - set pulse ...

Question about Thermadyne Inverter Stick/TIG Welder 185 AC/DC

1 Answer

set pulse is detected by the Shift Motor Pulse Sensor (PC8-LCC) after the shift operation has begun (shifter is moved to the right). • The Shifter Home Position Sensor (PC12-LCC) is not unblocked even

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6065 Answers

Marvin
Marvin

Level 3 Expert

85222 Answers

Are you a Lands Phones Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...