Switch IP Why we are using ip address for each port of any manageable switch Hi, the ports themselves don't have an IP address. The switch has one IP address for online configuration. this model does ...
...between vlan 2 and vlan 8. Any help would be higly appreciated. Hmm... on your DHCP server, try setting the "default router" IP for each pool to be the VLAN ID on the switch. scope 172.16.0.0 /24 ...
Question about Catalyst 2950 24x10/100 Mbps Networking Switch
IP Addressing by dhcp for vlans I want configure the DHCP server intalled on linux DEBIAN (gateway of the LAN) for having addressing for each of the 4 vlans of the netwok (managed by switchs ...
Question about Catalyst 2900 XL Networking Switch
...while as with another cisco 2900 it syncronizes You should confirm that all speed/duplex settings match on both sides of the link. Also ensure that there are not VLANs set on the ports to ...
Question about Catalyst 4503 (WS-C4503) 12x1000 Mbps Networking Switch
...happening? thx. Hi, The case gives me hints towards the configuration register value which is not set to proper value, so the switch is not checking the the saved configuration in the config file. ...
how to reset the password for cisco 2948G-GE-TX. In order to get your router back to the original settings, you must push in the reset button (usually on the back of the router) for somewhere between ...
Question about Catalyst 2960-24PC-S Ethernet Switch 26-Ports GigaBit Ethernet 1U Rack Mountable WSC296024pcs
...port using a roll-over cable RJ45-DB9, connect using hyper terminal or similar using the com port settings 9600,8,N,1You can then configure the switch from the CLI...Have you set the
Question about Catalyst Compact 3560-C PD PSE - switch - 10 ports - managed - desktop
...dhcp server on the switch. Do I have to set up the ethernet port in the switch as a VLAN or do it as a uplink port? The cable modem will need to go through a router because it needs a NAT and PAT ...
how to reset catlyst 2948G swtich get a console cable and and console to usb cable and plug it into the console port of the switch and type in the interface this: - enable - config t - write erase ...
Question about Catalyst 3750X-24T-S Layer 3 Switch - 24 Port - 1 Slot WS-C3750X-24T-S
...I agree WS-C3750X-24T-S supports BGP with IP services feature set, Just that ip services feature set is only available as an upgrade option so ensure this is the ...
Usually answered in minutes!
15 Questions
12 Questions
11 Questions
10 Questions