...DHCP server function and assign static IP add & config to the DLink WAN config. This way it will only be the DLink handing out IP adds to the network. The workaround. Install your original ...
...DHCP response. You will also need TFTPD32, and have it set up per these instructions : http://www.planex.net/pdf/switch/sw-0208g_setup_eng.pdf Norksman's Factory reset code is one of the reset codes, ...
Question about Aironet 1131AG 802.11a, 802.11g/b (746320933474) Wireless Access Point
...set up 10 to 15 laptops to access the internet using a cisco 1130ag autonomous access point. i dont have a dhcp server, or a switch nor router. i just want to get internet access for these systems. ...
...between vlan 2 and vlan 8. Any help would be higly appreciated. Hmm... on your DHCP server, try setting the "default router" IP for each pool to be the VLAN ID on the switch. scope 172.16.0.0 /24 ...
iphone is not browsing internet through the Cisco AP 1200 but its associated to the AP check your setting either static IP or DHCP. find out what is gateway and ping it.
...Call manager Cisco 7912G IP Phone? You must have a valid functional callmanager. You then set option 150 in your DHCP which specifies the IP address of the TFTP server which is ultimately
My CIsco 7940 is unable to obtain IP from DHCP and does not let me go into network settings? What do I do? You should contact your network administrator.
...users in. ie my new iphone & friends laptop Make sure the unit is set to DHCP. You will lose laptop connection if set to static.Web Interface:Device IP 192.168.15.1Username ciscoPassword ...
...is connecting to them with a wire until all your settings are correct. Make sure your Router is set to use DHCP and you should be able to get to the routers homepage....(192.168.1.1 or
Question about Aironet 1552h Outdoor Access Point AIRCAP1552HSK9
1552h is not appear in WLC How are they connected? Is option 43 set on the DHCP server?
Usually answered in minutes!
57 Questions
67 Questions