Questions & Answers for: set auto tray select ricoh

...set to auto select (File>page setup). The program will override the print driver. next make sure the driver setting (paper source) are also set to auto. make these changes by right clicking on the ...

...set to auto tray select or tray1/2. My understanding for the second page to ask for paper is either: 1/ what is mentioned above, 2/ the second page is not an A4 size document (mixed size pages). hope ...

...set printer for label insertion and printing. Thanks, Nancy [email protected] Labels should only be printed through the bypass tray. when printing, go to "properties", "Paper" and change tray from ...

...set to auto select, also in order to "program" auto select in the printer menu you need to select the enter key and then the "aito select" should then have an asterik next to it, meaning that the ...

Auto Tray selection for reasons we can't fathom. One minute it's pulling from Tray 1, the next it's insisting that paper be loaded in the Bypass Tray when there is paper in Tray 1, other times there's

set to "auto select" select the tray you want. Also make sure type of paper matches what is in printer. -Carl the problem is in the printer settings of the file you are printing, if it is set to print

...auto paper select should help. -Carl Make sure the paper trays are set to the right size. Press the Copy function key on the copier and look at the sizes shown for each paper tray -- are the paper ...

...fine. when you selected auto tray was that in the driver or microsoft settings ? microsoft settings will overide the copier settings driver. look under file then page setup to see what it is set

...and select it. You'll also have to set your print driver for cardstock or auto select, because if the print driver shows plain paper and the printer shows cardstock paper, you'll get a mismatch

set [Paper source tray:] to [Auto Tray Select] on the [Setup] tab in the printer properties dialog box, the machine selects the tray automatically. (I imagine you'd have to enter printer Properties or