Questions & Answers for: set antenna sanyo tv

...set doesn´t sound on normal channels. It only makes noise when there is no signal (without an antenna). Thank´s for your help. As It only makes noise when there is no signal (without an ...

...set is inferior to your previous one and you may need to buy an external broadband amplifier to boost the signal before it goes to the TV. The quality of antenna inputs has declined since there are ...

...the tv then do a channel scan. If you don't pick up all the stations set them on top and scan again or get satillite or cable hd boxes. There's antenna booster's you can buy or build yourself

...antenna input on the rear of the TV. Then set the TV to channel 3 or 4, depending on the converter box setting. The second method, which is better, is to connect the direct video and audio outputs ...

Set that cable aside. Now, remove the incoming antenna cable from the 625 "Ant. In" port, and connect it to the Sanyo's "Antenna In" port. Finally, scan for channels and check for the presence of CBS.

...set up new Sanyo DP26670. Need to switch from cable to antenna. Hello, you'll find a download for you Sanyo tv at the following link: ...

...may have a Wireless Internet antenna installed since some models can act a as wifi hotspot. If you need to access local TV channels, you will need to get an external antenna and attach it to the

...The model number is Dp19640 There is a threaded connector marked cable/antenna. You use this connection to attach the antenna cable. Then you do a channel scan with the tuner set to antenna not

...antenna just fine. I have a sanyo tv that was hooked up to my indoor antenna and it was working just fine and last night it started freezing up and my hubby messed with the setting or something ...

and antenna connections and try again. Verify your TV settings are set for antenna instead of cable. If you get no signal again then you may have an issue with the input connection, inspect for damage