Questions & Answers for: Jeep sequences

1989 jeep cherokee brake flush sequence I need the proper sequence to perform a brake flush on a 1989 jeep cherokee. Is not the same as other years as this was the year AMC was taken over by Chrysler.

what is the cylinder head torque on a 2001 jeep cherokee Please don't forget to rate....thanks: Tighten the engine cylinder head bolts in sequence according to the following procedure CAUTION During ...

head bolt tighting sequance for a jeep 4.0 CAUTION: During the final tightening sequence, bolt No.11 will be tightened to a lower torque than the rest of the bolts. DO NOT overtighten bolt No.11. ...

need torque specs for a 2001 jeep cherokee intake manifold Intake manifold using new gaskets. Torque the bolts, in sequence, to 105 inch lbs. (12 Nm)... Fig. Intake manifold torque sequence-3.7 & ...

what is the head bolt torque specs on a 1990 jeep 4.0 Tighten all bolts in sequence (1 through 14) to 30 N·m (22 ft. lbs.) torque. Tighten all bolts in sequence (1 through 14) to 61 NÂ

1994 jeep 4.0L replaced intake gasket 3 times. It keeps blowing. cat is ok.nothin is worped.any help would be great. First, if you are using the same brand gasket every time, try another brand ...

i am looking for the head bolt torque specifications and sequence for a 1988 jeep Cherokee 4.0 i6 Fig. 17: Cylinder head bolt torque sequence (click over pic for zoom) Apply sealing compound only to ...

Dear expert What are the cylinder head bolt torque settings for the 4.0L MFI straight 6 engine? Regards Dave Here are the specs and sequence: Install the cylinder head and bolts. The threads of bolt ...

head bolt sequence and tourqe for 99 jeep 4.0 motor CAUTIONDuring the final tightening sequence, bolt No.11 will be tightened to a lower torque than the rest of the bolts. DO NOT over tighten bolt ...

need torque specs foe a 2000 jeep with a 4.0 to be spacific i need the mains rods and head Hello mooredavid42, The Head bolt torque is as follows: 1. Tighten all bolt in the sequence shown in the ...