Questions & Answers for: Ford Explorer separated

transmission code obdcode p1762 keeps coming up and won,t pass n,y, state inspection what is problem Here is the TSB from Ford: Here it is... TSB 03-22-10... FORD: 1995-2001 EXPLORER 1995-2002 RANGER ...

how do you adjust the headlights on a 1998 ford explorer? The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail ...

Bad right rear axle. Need to know how to replace axle. How to remove the right rear axle from a 2002 ford explorer 4 wheel drive Dana or Ford axle? Ford here: SECTION 205-05: Rear Drive Halfshafts ...

How do I replace the upper ball joints in my 2002 Ford Explorer? The upper ball joints are replaceable without replacing the control arms. Use Moog K80008 ball joints and a ball joint press. The ball ...

2002 ford explorer rear wheel bearing removal Rear Wheel Bearing REMOVAL AND INSTALLATION 1. Remove the wheel knuckle. Wheel Knuckle REMOVAL AND INSTALLATION CAUTION: Do not loosen the axle wheel hub ...

How to change a right headlight on Ford 1998 Exployer Does that model have a separate bulb, accessible from the rear of the assembly? Most modern cars do.

...check engine light on and gringing noise Sounds like your toe ring on one of the front axles has separated and needs replacement. Its a $30.00 part and about 1 hour

necessary commanding charge fees and costs The vehicle's mechanical levers are joined together only separated at ball socket areas. Every ball socket area is lubricated to minimize wear though require

when i crank up my explorer it is pouring transmission fluid stop at a red light an it leaked out a quart of fluid You won't go far this way. Its cheaper to tow it than replace a transmission. There ...

2000 explorer will not start makes clicking sound replaced battery,plugs,wires,starter Fords usually have a starter solenoid separate from the starter. If the contacts are bad in the solenoid it will ...