...anyone tell me what they refer to? Thanks, Alec Parley the p2127 code is an Accelerator position sensor (low input) as is the p(2138) could be moisture or debris in harness plugs. Try using ...
...Engine Speed Input Circuit Intermittent P0324....Knock Control System Error P0325....Knock Sensor 1 Circuit (Bank 1 or Single Sensor) P0326....Knock Sensor 1 Circuit Range/Performance (Bank
is the tps sensor the same thing as an app sensor No, your car is a fly by wire. This means there is no throttle cable its all electronic. The tps is the throttle position sensor, and the app is the ...
abs lite on check for dirt on wheel sensors,if this don't work one of the sensors are probubly bad.
2005 Kia Amanti dies My Kia has had the crank, cam and throttle position sensors replaced but still dies at high and low speeds. It will occasionally have a strong gas smell and a kick in the rear end
crankshaft sensor how do i replace it your crankshaft sensor is located behind the timing chain cover
Kia Amanti Ignition failure sensor P0320 (Ignition falure sensor), P2138 (Accelerator Postion Sensor), and P2127 (Throttle/Peddle Position Sensor codes show. Would I (a rookie) be able to replace the ...
accelerator pedal sensor Where is the sensor located and how do you replace it? there is no pedal sensor... there is a throttle position sensor located on the throttle body (near the MAF). Replacing ...
car not taking the gas,code p2122 and p2127 check your aps sensor,accelarator position sensor if its bad and make sure all connector and wire from this sensor to ecu is good,. DTC P2122: ...
Question about 2004 Amanti
My car cranks but won't start a P0102 code came up for the mass air flow sensor I replaced it and now it still just cranks with the code coming up still can this cause it not start? P0102 KIA Mass or ...
Usually answered in minutes!
293 Questions
292 Questions
96 Questions
43 Questions
1 Questions