Questions & Answers for: sennheiser mic problems

Live Microphones When I sing into the mic, my mouth is typically RIGHT ON the actual head of the mic. Lately, two of my mics have been "shocking" me. Yes, physically sending some sort of electric ...

The mic is a Sennheiser me55. have seen a couple of these cameras with this problem. a defective board inside the camera is the culprit. the board itself costs around $500 plus the labor to replace it

...sennheiser handheld mic and reciever. I am having problems with the RF signal on the receiver. It drops out if I move even a few feet away.All of the sensitivity and squelch settings are ok. I have ...

...mic that a local TV station is already using to broadcast, it will cause RF Interference (Radio Frequency). You'll probably hear static noises, pops, or since your Sennheiser has a Squelch feature, ...

Sennheiser MM 50 iPhone Mic & Button does not work I purchased a set of Sennheiser MM 50's for my iPhone 3G today and I found that the microphone and answer/end call button does not work. I took them ...

mic or headset, which should always be done first. Sennheiser recommends sending it in for repair, and here's their site: http://www.sennheiserusa.com/serviceandsupport_faqs_other-questions Good luck,

What is the best setting EQ wise for a Sure beta 58A and a Sennheiser e835 mics? I have the HA120 Always start with flat setting. Be careful of boosting highs as feedback may be a problem Put the ...

Sennheiser ew 100 G2 wireless mic. I thought the original problem was the red off/on button was missing, but when I opened the bottom of the microphone to replace the part, I noticed the pieces that I

sennheiser e825 mic suddenly started making a loud POP through the P.A. when I switch it on or off? I have had no problems for 12 years with the same set-up. Look to see if there is a capacitor across

I have a xennheiser ew500G2 mic system and the orange rubber on off button keeps going inside the mic. We know how to fix the problem but now the orange little button has split in two. Can we just ...