Questions & Answers for: seloc repair manuals

loss of 500 rpm when planed and long time to get on to pane. Runs rough when it is sifted into gear at low rpm what engine ?

steering doern't turn i pulled cable nut off and cable slid fine with the cable disconnected from engine does the wheel turn ? does the engine turn freely ? grease all joints and cable sleeve etc !

Why does my 1991 60 hp Evinrude outboard alarm sound and motor sputter occasionally? when the alarm goes off is the engine getting hot, try running it in gear under load while tied up and with the ...

find year by serial number06272499 I come to an R/MR/Alpha One drive from 1983... Maybe specify make/model number

How to replace the water pump impeller If you have no idea , best take it to a repair shop and have it done .I worked on motors for 20 years and many times people brought them to me after they messed ...

Oops one of my 2005 yamaha 115 4 strokes write to will start but will not stay running, the fuel ball also goes soft. Start will fuel - water separator? Hey Alex, No, I would get a new bulb..check for

I have a 2002 225hp optimax outboard ,I have no ignition at motor no power ,its not a fuse and its not the battery ,and it has a new data cable ,everything is brand new Is the kill switch ON?

torque specks on 2005 15 hp yamaha 2 stroke head gasket http://www.marineengine.com/boat-forum/showthread.php?293968-Head-gasket-tight-sequence-and-torque-specs

what is the float setting for an '04 150 Yamaha 2 stroke Every 2 stroke I've ever worked on, the float is set parallel to the bottom of the carburetor. Turn the carb upside down and look to see if the

I need help with a tohatsu out board motor how many volts should be coming out solenoid to starter? NORMALLY 12 VOLTS DC 12 volts or more