Questions & Answers for: Kenmore seized sewing machine

...sewing machine 15343 as soon as I start to stitch the top thread binds up down near the bobbin, and then it seizes up(doesn't move anymore) If it doesn't seize up the only stitches that stick on the ...

machine won't spin the bobbin to thread it up on top. it sounds fine but it just won't spin it. either the bobbin winder is seized or the rubber wheel has broken or come off. if it has seized you will

sewing machine motor seized up and broken parts near bobbin motor seized up in the middle of sewing, i tried to manually turn the wheel but it wouldnt move so i looked in where the bobbin goes, took ...

...sewing machine oil. When a machine has seized, I prefer using liquid Tri-Flow Synthetic Lube (hardware store or bike shop). Open the top, side over the needle bar, and the bobbin area. Gently wiggle ...

...sewing machine 2142 occasionally sticks approx every 6-7 turns .How do you fix this problem many machines need cleaned and oiled If it is an older mechanical machine, the machine is most likely ...

sewing machine model 158.905? Do NOT oil the motor unless the manual instructs you to do so. (Sears carries manuals for most of their machines.) Your machine appears to be an older mechanical machine.

...sewing machine won't sew, it just makes a noise If it's an older mechanical machine, it most likely has seized due to lack of recent, thorough oiling. Refrain from forcing the machine to run as it ...

...sewing machine 158 1784183 Search for: Make Model manual *may not find the exact same model but similar models operate and thread the same--some have more stitches and accessories than others" Your ...

sewing machine model12621 has been sitting for 20 years. I tried to start it the motor dos not turn, After 20 years of non-use, the motor may have seized. After a period of time, the old oil dries out

...sewing machine I bought in 1990; it doesn’t reverse anymore. How do I fix it Those older machines do need regular cleaning and oiling. I suspect the oil has dried and caused the switch mechanism to ...