Questions & Answers for: Brother seized sewing machine

Ad

Question about XL-3510 Mechanical Sewing Machine

1 Answer

...sewing machine binding I was sewing normally when the machine started slowing down and now with great force I can move the handwheel. It seems like something is caughting or binding. I cleaned the ...

Ad

Question about CS-8072 Computerized Sewing Machine

1 Answer

...seized up. Take off the needle plate and remove the bobbin case. With the handwheel moving in the sewing direction, when the needle has reached its lowest point and has moved up 2.5 millimeters the ...

Ad

Question about CS6000i Computerized Sewing Machine

1 Answer

Was getting an E6 error, cleared out the bobbin and thread but now the motor has seized and the needle wont go all the way up or down. What can I do to fix it? Make sure the twin needle button is not ...

...I bought the machine that oiling is not generally necessary. Or could small thread be caught somewhere between the balance wheel and bobbin? the machine needs to be serviced at a sewing machine ...

Question about SE400 Computerized Sewing Machine

1 Answer

...seized. I was sewing, ran over a pin, and my machine just stopped. The wheel would not turn at all. I removed the plastic case and loosened the set screw on the needle bar crank rod from the needle ...

Question about XL-5340 Mechanical Sewing Machine

1 Answer

...sewing machine to fix the turning wheel. Somewhere on the case it is still attached to the machine. I can't figure out how to remove the case. If you do that, you'll void the warranty on the machine. ...

shuttle on a Brother VX-1120 sewing machine does not move to be able to thread the machine Seized ?

Question about XR7700

1 Answer

xr7700 E6 means the machine is seizing somewhere and the motor is working too hard to turn the hard-to-turn machine. Get is serviced before it seized completely and the cost of repair goes even higher

Question about CS-8060 Computerized Sewing Machine

2 Answers

...sewing machine - hold the bobbin in front of you so that the thread tail makes a letter p as it hangs from the side, and drop it into the bobbin case. Draw the thread around the guide and trim with ...

Question about CS-8060 Computerized Sewing Machine

1 Answer

seized up I've tried oil and wd40 what else can I do Ooh, do not use WD-40 or old sewing machine oil. WD40 will work for a short time but turns to gunk quickly and just add to the current problem. The

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machine Experts

Irene Tulloch

Level 2 Expert

498 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

222 Answers

Cindy Wells

Level 3 Expert

6136 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...