Questions & Answers for: Konica Minolta DiMAGE second

The shutter speed cannot be set to 1/3200 second both in M and S mode. How can I set it to 1/3200 second? The speed, 1/3200 sec. is the highest when the aperture is used. As a condition, it is ...

boot the camera? How long does it take to boot the camera? Start-up time for the DiMAGE E201 is approximately 4 seconds in recording mode, and 3 seconds in playback mode.

...After the focus is confirmed, the Shutter-release time lag for the DiMAGE E201 is approximately 0.4 second. If the shutter-release button is depressed in a quick motion without making any pause to ...

...it to take to record the image data to the Compact Flash card? Full size image: Approximately 48 seconds for Super Fine images, 5 seconds for Fine, 2 seconds for Standard, 1.5 sec for Economy Half ...

Dimage E323 "system error" Camera was working fine. I turned it on, the view finder moved out, but the red light kept flashing....the view finder motor stopped, after a few seconds it groaned for a ...

Self Timer Activation What, exactly, activates the self timer? I have set the option to either 2 or 10 seconds in the menu. And have followed the manuals instructions. Steps: Press the shutter-release

...I have a Minolta Dimage G400. Everytime I take a picture there is a double flash about 1 to 2 seconds apart. The picture is taken on the second flash. How can I set it up to flash only once? ...

Even with new batteries, the camera turns off after a few seconds Be sure you have real fresh Alkaline batteries or fresh recharched NiMh batteries. The best rechargeable batteries are the ENELOOP ...

...dial to select the self-timer drive mode. Use the rear control dial to to switch between a ten-second and a two-second delay. Press the shutter-release button partway down or press the function ...

...release is slow, I press the shutter release and the camera doesn't take the photograph for a second or second and a half. I'm in auto or sports settings To get it to instantly take the