Questions & Answers for: seat noise

...seat and its makes clicking noise, and control shows it's on the high heat position, but there is no heat. Normally, I don't hear the clicking noise when I change from on/off/low/high heat. i have a ...

Ad

...its really hard to hear noise's. This car is noise prone by the way. A very common noise comes from the 3rd row lower seat brackets. Drive the car and check for noises from the 3rd row seat

Ad

Question about 1996 Grand Cherokee

1 Answer

...a loud ticking noise and if you try to move either seat it will stop the noise Check seat switches, connectors & harness plugs, otherwise get another second hand seat & change over

...corvette power seat switch makes lots noise when in use and seat don/t moove when i use the switch to operete the seats makes loud noise and seat dont moove check the gear boxes they might be ...

...noise untill the seat belt gets put on is it this noise could be a faulty seat sensor wouldent of thought it was the turbo hissing or screeming yes but not a buzzing noise but then i could be wrong ...

...noise" that sounds like it is under your seat? Where the transmission cable loops around under the vehicle, on its way to the transmission, there is a white plastic clip that supports the cable. When ...

Question about 2009 Corolla

1 Answer

...Seat makes banging noise. Can't tell if noise is coming from adjustment mech. or seat itself. Mounting bolts are tight. seat frame could be broken -- grab the seat back while sitting behind it and ...

...side back seat in a chevy trailblazer I hear a noise from under the passanger side back seat in a 2005 chevy trailblazer I need heard the noise before anything from debris to exhaust loose or ...

...new motor or it may be jammed but if it doesn't move then it's not jammed because if it's jammed it would make a noise if you're not getting any noise when you hit the button you need a new seat ...

...seat makes noise when moving backwards. Does not happen when moving forward. Is it the motor? How do I change it if so? Is there an adjustment or work around to avoid replacing it? If I must replace ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...