Questions & Answers for: Yamaha seat brackets

Question about 2005 YZF-R1

1 Answer

...seat. Disconnect red and black wire from battery and any brackets or straps holding your battery in. Replacement is opposite of removal. INSURE battery wires are RED to positive + side of batt and ...

Ad

Question about 2002 YZF 600 R thunder cat

2 Answers

how to remove fuel tank Im not to sure on street bikes but i know on dirt bikes you pop the seat off first and if needed the side covers too.... then u can access the fuel tank bolt to take it off the

Ad

Question about 2005 V Star 1100 Classic

1 Answer

...seat. Pulling back on the pillion after removal of the hold down bolt usually releases it. The brackets to hold the saddlebags straight and away from the rear tire/ brake disc. Mounts with shims to ...

Question about 1996 Royal Star XVZ 1300 A

1 Answer

the seat lock will not open. it looks like an allen about 4-5m socket head holds the plastic key shroud in place. is this the only fastener for the lock mehanism? Yes. The seat lock is a sealed ...

how to charge battery on yamaha tw 200 the battery is seated right below the seat, remove the seat, expose the battery, pull the rubber bracket off, and there you go, battery is loose.

Question about 2007 Road Star

1 Answer

how to remove gas tank Turn the petcoc(k) off and remove the fuel line. Next, remove the seat - remove the rear seat first then the front. Under the nose of the seat you will see a large bracket with ...

Question about 1999 V Star Classic

1 Answer

how do i remove the rider seat on my 1999 yamaha R6 Hello, The Yamaha R6 has two bolts that hold the riders seat on. You have to lift the foam and push forward at the rear end of the seat. The outer ...

Question about 1999 V Star Classic

1 Answer

how to open the seat If it is any thing like my 1980 Yamaha, then there are two bolts loosely swinging from the seat down to a catch bracket mounted on the frame about two thirds back from the front. ...

Question about 2002 Road Star

1 Answer

I can not get the driver seat off of my 2002 roadstar. Is it cable connected or electronically attached to the ignition.? If you have a custom seat unscrew the back screw. Then insert the key into the

...seat to complete this task, the seat is secured by 2 x 5mm alun key bolts, one in each corner of the seat, gently lift up corners and undo the seat, once removed the footrest brackets can be ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...