Questions & Answers for: seat belt car stuck retracted

...can't pull out possibly the seat belt has been pulled out all the way and the locking mechanism has been activated, if this is the case seat belt must retract all the way back in to reset this ...

...seat belt is stuck I have a 1997 Ford Escort. The rear seat belt will not retract or release to let it pull out. Please help. make sure that the rear seats are properly locked into rear catches as ...

seat belt? you need to pull the belt out all the way to release it ,they have a locking mechanism for baby seats that stops them retracting,you pull them all the way out and they are reset and retract

...my rear seats and i cannot get the rear passenger side up. It is as if the seat belt is locked. it is you have to remove belt to get seat up the tab that keeps belt from retracting too far came ...

...Seat belt Stuck The center seat belt is a the auto locking belt, mounted inside a sealed rear seat, that can be used to hold a baby car seat. I removed the car seat and the belt retracted back into ...

...seat belt I pulled the top strap behind the headrest, then proceeded to tighten it, without thinking about the fact that it would be stuck. The carseat isn't in the truck anymore, but when I went to ...

...seat belt light is on... Both problems occurred at same time. Seat belts lock up when the belt is pulled on as the pendulum is rocking, and it could have been released at this time on a hill. This ...

...fix a stuck or locked rear seat belt in a 2002 Sienna? if you can pull the belt out then release it so that it retract, fine, if not DO NOT try repairing mechanism. buy a new belt.no price for ...

...seat belt belt retracted and wont move either way The problem: The set belt stop has been lost so the seat belt retracts too far when the seat is laid flat. When laid flat the release mechanism lock ...

...seat belt not working Fortunately for you, there are a few ways how to get a seat belt buckle unstuck. To begin with, a seat belt can be stuck due to two reasons: a) the problem may lie in the ...