Questions & Answers for: sears dryer stopped working light

...dryer. I purchased it brand new from sears in August 2001. I have noticed about 3 weeks ago when I went to dry my clothes that the timer does not move. The dryer still heats up, it takes a little ...

dryer gets wet from the moisture, it never dries enough for it to start working again. This is a bad design from Sears/Whirlpool. I learn my lesson that just because its more expensive doesn?t make it

...dryer works fine. I know this isn't a proper fix, but Sears doesn't have one either. I had a Sears Tech to my house right before the warranty expired and she had no idea what to do and said the dryer ...

working and for the first two or three cycles the gas comes on as well. Then the gas stops coming on and the igniter cycles on and off at about 10 seconds per minute. No gas and no clicking noise that

...Sears for you model for under $10 if yours is missing. Some models vary in what each code means so you will need the tech sheet to be sure. Best of Luck Everone... I found the tech sheet under the ...

the resistance. If you apply heat with a hair dryer the resistance will change. If the resistance does not change or the change is erratic replace the thermister. You can buy them online or from Sears

...dryer thinking a solution would come up eventually. Sears refused to help us back when it initially broke down. This info needs to be passed on to any owner of this model dryer. Thanks again Our ...

...dryer. If it runs, the fuse is blown. If it still doesn't run, the problem is something else. I got a replacement at a Sears repair location, but they can be purchased from several places online for ...

...light lens. Increase it a bit and test. The controls (potentiometers) that regulate force get dirty in time and make poor contact inside which become evident when cold as the contact springs separate ...

dryer, the subject of this review, the Elite series also sports an HE2, HE3, and HE5. The HE5 wasn't available at Sears, but we looked at the lower numbers as well. The HE4 was our choice due to extra