Questions & Answers for: KTM seal 150

Question about 2005 EXC 125

1 Answer

...Im installing a FMF Fatty Pipe with a Powercore 2 Silencer. Now when i install it do i have to seal the part where the pipe and the silencer meet? My stock pipe that's on it now have a little ...

Ad

Question about 2004 MXC 525 Racing

1 Answer

oil leak I have an oil leak on my bike where the countershaft sproket goes. I replaced the seal and it still leaks the same amount if not more. It is a bad leak not just a few drops. Any ideas on ...

Ad

Question about 2008 300 EXC-E

1 Answer

leaking fork seals G'day just wanted to now how to change oil and seals on my 2008 300exc-e? I've taken the forks off and wondering the best way to go about it? Im replacing the fork seals on my ...

Question about 2003 SX 125

1 Answer

oil leak on gear shifter shaft does anyone know how to change seal on gear shifter shaft. i think its a external seal . its a ktm 125sx 2003 ive orderd part but would love a bit of info cheersa lads..

Question about 2005 EXC 250

1 Answer

ktm output shaft oil seal how do i replace the output shaft oil seal on my ktm 250 exc if you are lucky there is a clip behind the front sprocket remove both then pop the seal out drain gear box oil ...

Question about 2006 125 EXC

1 Answer

fork seals leaking does anyone know how to replace the fork seals on a 125 exc in detail step by step. and how much oil do the forks have. can I get manual anywhere. I recommend sending them out, or ...

Question about 2006 125 EXC

1 Answer

trying to remove my fork seals from 2005 ktm exc 200. I have the cartrige out but i cannot get the tubes apart or the axle end off. Is there a way the tubes come apart. Hi, i presume from your thread ...

Question about 2006 125 EXC

1 Answer

coolant leaking from hole under water pump houseing Coolant leaking from the "weep" hole indicates that the seals are out on the water pump. That's actually what the hole is for, to monitor the ...

Question about 2003 EXC 525 Racing

1 Answer

change front fork seals Take your front wheel off and stand bike on box or stand. The cable and brake may interfere but leave it on so you don't open up any hydraulic systems Drain the forks. . ...

Question about 2009 150 SX

1 Answer

fork seal replacment Need to change the fork seals. please help These are "upside down" forks... take them to the dealer...OFF the bike. seriously-- Its easier!!! SPECIAL TOOLS REQUIRED!!

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top KTM Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...