handle stuck delta single handle took screw out really stuck you may need a tool to pull thi out. you can get it at home depot,it's called a cartridge puller,you screw it on the cartridge and follow ...
Question about & Single Handle Shower Faucet
I have Delta Series 1400 Solid Handle and after taking the tension screw out I can't get the handle off. What do I need to do. There is a set screw under the handle. You will need an allen wrench (hex
Question about 978-RBSD Leland Single Handle Kitchen Pull Down Faucet with Soap Disp...
my delta 978 is dripping and when I remove the set screw I cannot get the handle off. how do I remove a stuck handle without damageing it. squirt some penetrating fliud into set screw hole,and let it ...
Question about & Single Handle Shower Faucet
trying to repair 1400 monitor in shower but the brass fitting holding in the cartrige is stuck, tried wd-40 no help if i over tourqe i start to bend the whole assembly, any suggestions is the thread ...
Question about Model 470: Signature Kitchen Pull-Down/Out Faucet - White
My delta 470 faucet leaks, I have purchased the repair parts, , but when I unscrew the set screw, my handle will not come off. Can you assist me as to why it will not pull off? Are you sure there is ...
delta rp46074 replace When trying to remove old cartridge it broke and part is still stuck inside. How can I get this out? One way is to drill a hole in the broken part then drive screw in alittle ...
Question about & Cartridge Assembly
Delta II urinal continues to flush after replacing the diaphragm Refer to instructions that came with valve body, orgo on line and read them CONTINUOUS FLUSHING:1.The Regulating Screw (061024A, item ...
Table saw blade tilt wheel jammed. It's a delta 34-457. Can't remember if I rotate wheel clockwise or counterclockwise to return blade to 90 degree position. Presently stuck at 45 degrees. Question ...
Usually answered in minutes!
350 Questions
37 Questions
5 Questions
4 Questions