Questions & Answers for: screws ceiling fan blades hunter

...ceiling fan, a 56" I think. Four blades with three screw holes each. The rubber bushings for each hole have disintegrated. Where might I find new bushings? Thank You The Hunter web site should have ...

...ceiling fan and would like to reverse the blades and dont see any screws.Is there another way the blades may be connected to the fan besides screws. look as far up as you ca... it may be one of those ...

...how do you mount the blades to the rotor there is only 1 screw hole while there are two holes in the blade Sounds like the blades were not made for this fan assembly--I'd take it back for

...which hold the blades to the motor loose? Check those screws and the oil level. Here is the owners manual to your fan ...

...ceiling fans recently. I bought them because of the promise of "whisper quiet." To my great disappointment the motors are loud. I have one on in another room and I can hear it! I paid $115 ...

...ceiling fan. I told them that I here a clicking noise still , they said to go back and tighten every screw. I did that but the clicking noise is still their. What are my options fixing the clicking ...

...ceiling, the fan is starting to make noises like a flutter, ticking noise it doesn't do it constantly will do for about a minute then stop and then start again. Diane, usually, that's an ...

...ceiling body fan in order to figure how to remove the blade. Once I removed the arm which is attached to the blade; I laid it the blade portion on my lap and then the arm away from my body. Then I ...

We've taken this fan down. How do you take the fan blades off???? The blades are usually held on with little screws with nuts and washers on them. Usually a screw driver will turn the screws.

Need to fix blade is lose What model do you have? Probably have to remove the light & switchcup to get to the blade screws.