...the palm of your hand and come from the side of the car. Your other option is to wedge a flathead screwdriver between the lens ans fender and twist the screwdriver to pry them apart. Be careful if ...
...to the manual, the bracket can not be removed, until the pully is removed. You have to insert a screwdriver through one of the pulley holes to hold it, then break the bolts loose. You should be ...
...to be broken away from crankshaft. I can turn the harmonic balancer and hold the flywheel with a screwdriver and it turns without moving the flywheel? Yep, your fly-wheel broke. what do you need
...the belt or chain(***.Import) then put in two screw's if you are just checking the timing then a screwdriver will do. ...
...of the backplate is a rubber plug,pull it out and inside is a tiny wheel you can turn with flat screwdriver or similar. Its down on both sides to move the handbrake shoes out to get a better ...
...If you don't have access to the above, you can remove the starter motor and jam the flywheel with a screwdriver or something and use a long breaker bar on the crankshaft bolt. (Kind-of the hard way, ...
...1999 isuzu rodeo You should just need a socket wrench and a few sockets. You will need a flathead screwdriver as well. you are going to need a size 10,12,14,17 and depending on if you have a fan ...
how to remove both front cv axles from front diff, i have every thng off and this aint my first rodeo, so whats up with getting the inner cv joint out of the diff. If you have everything loose so the ...
If no screws are evident, probably just on real tight, try to pull hard, maybe the handle end of a screwdriver to tap on it from the side or underneath
...trooper My wife, whom I adore, decided to try and replace her headlight on her own. Armed with a screwdriver, she managed to cut herself, as well as completely remove the headlamp assembly,
Usually answered in minutes!
480 Questions
463 Questions
423 Questions
323 Questions
317 Questions