Question about 8" LX90 LNT Schmidt Cassegrain Telescope with SmartFinder w/ FREE UPS
thumb screws for meade finder scope They are 10-32 thread; most hardware stores will have something that will substitute.
Question about 8" LX90 LNT Schmidt Cassegrain Telescope with SmartFinder w/ FREE UPS
...finder and telescope are lined up pretty well, as far as I can tell without not being able to see through the telescope. I can see light and dark but nothing comes into sharp focus, when I turn the ...
to a distant object like the top of a telephone pole. Without moving the telescope adjust the small screws on the finder scope to LINE-UP on the same object
...Line up the small finder scope on that object without moving the telescope. Use the small thumb screws on the finder scope to put the "X" crosshairs on the same object as you see in the
...finder scope on ether side like my 10? and 8? scopes had. There is only one screw in the front and back located in the optical tube not the soiled black main back or the soiled black corrector plate ...
...you have a tree or mountain peak in the center of the main scope's image, you can then adjust the screws around the finder scope to get the crosshairs (or red dot) centered on the same object. It
Question about DS-2114 ATS (325 x 114mm) Telescope
...you have a tree or mountain peak in the center of the main scope's image, you can then adjust the screws around the finder scope to get the crosshairs (or red dot) centered on the same object. It
...screw holding the secondary miror passes through a compression spring which seems to me to be a bit short (abt. 1 cm). What is the specified size of the of this spring? #2: The reticle in the Polar ...
Usually answered in minutes!
106 Questions
88 Questions
68 Questions
50 Questions
43 Questions