Questions & Answers for: screw finder

Ad

Question about NorthStar 78-8831 (525 x 76mm) Telescope

1 Answer

...to slide it towards the front or do I need to use a screw driver? The red dor finder is hardly described in the doc. Any drawing or picture would help. Many thanks Roberto Mine SLIDES off

Ad

Question about Advanced C8-SGT 11026 (480 x 203mm) Telescope

1 Answer

I need the screws that attach the finder scope to scope I need the screws that attach the finder scope to the OTA, where can I Buy them in the uk? I have a Celestron C8 You can check local hardware ...

Ad

Question about Advanced C8-SGT 11026 (480 x 203mm) Telescope

1 Answer

...and get the moon or the star into the main tube's eyepiece. Without moving the scope adjust the screws on the sides of the finder scope and center the crosshairs on the target. Now you can use

Question about Deep Space Hunter 6 (240 x 152.4mm) Telescope

1 Answer

the holder for the sighting scope that is mounted to the main tube of the telescope with two screws is broken and i need to replace the holding part that has two screws so that I can use the sighting ...

Question about Deep Space Hunter 6 (240 x 152.4mm) Telescope

1 Answer

...finder. There is a screw under the flash which I can't get to. Any suggestions? There's a covered screw in the center of the adjustment knob on the view finder. Probably that's the ...

Question about DWM40L Miter Finder Digital Protractor/Angle Finder

2 Answers

...Open the the moveable arm and make it straight (180 degrees) or in line with the other.Take the screw off of the black cover at the elbow (1 screw). Lift from the round part and lift off. Then ...

Question about DWM40L Miter Finder Digital Protractor/Angle Finder

1 Answer

finder has locked itself on 888.8 and I can not swithch the machine off, even when I put in new batterie it does not correct itself, please can you help. Open the the moveable arm and make it straight

Question about DWM40L Miter Finder Digital Protractor/Angle Finder

1 Answer

...and point the scope towards a landmark during the day. Now look through the finder. Loosen the screws of the finder and move it until the finder LED is pointing towards the landmark. Tighten the ...

Question about DWM40L Miter Finder Digital Protractor/Angle Finder

1 Answer

...has a weak battery, the beeping sound is weak. I like to change the batteries, but not able to find screws to open it, I am reluctant to pry it open. I need to know the brand/model#. My stud finder ...

...focus it and centre on some distant object, a tree, blg, tower etc.

Then use the adjustment screws on the finder to centre it on this same object.

Change to your next higher power

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Optics Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

ray gallant

Level 3 Expert

71004 Answers

ADMIN Canada
ADMIN Canada

Level 3 Expert

36670 Answers

Are you an Optics Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...