...screen voltage even with the screen adjustment on the flyback all the way up.Also with a high voltage probe Im only getting 28K volts & its a 32inch screen. On the CRT PCB, there is a ceramic ...
Blank screen The unit will turn on (green light) but the screen is blank. Is this a problem with settings on the unit or more serious? Thanks. you need to check the screen voltages inside the unit is ...
...voltage in the screen driver board, probably a bad capacitor in the screen driver board or perhaps in the main power supply. The only way to tell would be to look at a schematic and measure the ...
...voltage the screen goes dark. Most inverters do not fail right away, there are voltage fall offs etc. Inverters are approx. 15-20 bucks on ebay, for most laptops, they can be changed out simply by ...
...voltage DC power to the screen inverter board. The screen inverter board works as a power supply for the backlight lamp mounted inside the LCD screen. It converts low voltage DC power to high voltage ...
...voltage DC power to the screen inverter board. The screen inverter board works as a power supply for the backlight lamp mounted inside the LCD screen. It converts low voltage DC power to high voltage ...
...screen voltage is coming down. You can open and set this up or the potentiometer may be faulty or a high voltage capacitor is weak in the screen/grid cirrcuit. Temporarily the screen voltage can be ...
Question about Pavilion dv5000z Notebook
...voltage DC power to the screen inverter board. The screen inverter board works as a power supply for the backlight lamp mounted inside the LCD screen. It converts low voltage DC power to high voltage ...
Question about Pavilion dv5000z Notebook
voltage on the screen I've got two hummingbird 898c si fishfinders. While in use , low voltage comes across the screen. What would cause this? HelloCheck the input voltage to this device. To
I turn the screen voltage up? I can not locate the knob to turn the screen voltage up. On many Sony CRTs, the Screen (G2) voltage pot is located on the neck board instead of on the flyback transformer
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions