Question about RX-V463 Receiver
setup correctly. There are no errors on the screen. Thanks. You need to press the AMP button before you press the ENTER button. Always press AMP first when selecting menu, enter, any surround mode, or
...screen. I suspect this is the receiver "set up" output. For the setup functions you have to use either the monitor out (a yellow jack on the top-right corner of the back) or you have to use component ...
screen, go to "manual setup" then "speaker setup" check your settings on "surround rear" and "surround back" If your not using zone 2 and zone 3, in the menu for zone 2 amp, select "Ext" and "Ext" for
...setup screen, blue screen or flash as you change inputs on the receiver. If you do not see anything from the receiver check the HDMI cable from the monitor out of the receiver to the input on your ...
...Digital, or Auto" and you can double check it in the "On Screen Menu", "Manual Setup" "Audio" Hope this helps, if you still have an issue, check the "Source"(DVD,Cable Box, etc) setup mode as
...setup menu by pressing the "On Screen" button on the receiver's remote control. * Navigate the menu to "Setup". * Then scroll horizontally to "Multi Zone". * Select "Zone2 Set". ** If the menu items ...
...Setup comes up in the screen. 4. Press the Enter Button on the remote control. 5. The Setup Menu will come up across the TV/Monitor screen. 6. Use the Arrow Left & Right buttons on the remote to ...
...setup button, but there is nothing except black screen. Do i miss something or i need to eneable some hiden options? My guess is that the OSD function can only be enabled directly at the Panasonic
Question about RX-V375 5.1 Channel Home Theater Receiver with Discrete Amp Cir
...screen Make sure Subwoofer power is on and connected with RCA cable in correct place. Go into setup of "Speaker setup" and select 5.1 setup. Activate subwoofer to YES if setting is No. On some Amps ...
Question about RX-V375 5.1 Channel Home Theater Receiver with Discrete Amp Cir
...setup screen, which says press setup key to start which I can NOT do as there is no setup key on the receiver itself!! ABSOLUTELY RETARDED!!!!!! PLEASE HELP! Is there a remote control that works from ...
Usually answered in minutes!
192 Questions
173 Questions
140 Questions
146 Questions
92 Questions